Ukubonisa umlingani
Pneumatic conveying device is a kind of equipment which uses compressed air as power to convey materials in pipeline. It is suitable for conveying new sand, old sand, type sand and waste material (sand mass less than 40mm) in mechanized production line and small hand-molding foundry, and can also be used for conveying dry granular materials with similar characteristics as above. In addition, the device can also be used in conjunction with S568 resin sand regeneration complete set of equipment, which can convey sand to the upper part of the air separator, so that it can accelerate the impact of the impact device, so that the inert film on the surface of the sand grains is dehiscent, and achieve the purpose of secondary regeneration.
In the whole set of equipment, due to the use of spherical elbow, so the pressure loss and wear at the turn is very small, the conveying pipeline can be arranged in any direction and at any angle; it can realize long-distance conveying and automatic control; a sender can have more than one discharging point, and the discharging point can be chosen arbitrarily; two kinds of materials can be sent separately or at the same time by one sender; the materials to be conveyed can be free from contamination, and at the same time, they do not contaminate the environment; the pipeline has little wear and tear. It has the following features: less material crushing, low energy consumption, less maintenance, short conveying cycle, high productivity, and less loss of sand temperature during conveying.
The device is mainly composed of sender, booster, spherical elbow, unloader, piping system, etc. The compressed air is passed into the sender tank with materials, so that the materials are mixed with compressed air and fluidized, and the materials are sent to each unloading point through the conveying pipe under the impetus of compressed air.
Pneumatic conveying device according to the production capacity can be divided into 5t/h, 10t/h, according to the customer's actual production demand for adaptation.
In the whole set of equipment, due to the use of spherical elbow, so the pressure loss and wear at the turn is very small, the conveying pipeline can be arranged in any direction and at any angle; it can realize long-distance conveying and automatic control; a sender can have more than one discharging point, and the discharging point can be chosen arbitrarily; two kinds of materials can be sent separately or at the same time by one sender; the materials to be conveyed can be free from contamination, and at the same time, they do not contaminate the environment; the pipeline has little wear and tear. It has the following features: less material crushing, low energy consumption, less maintenance, short conveying cycle, high productivity, and less loss of sand temperature during conveying.
The device is mainly composed of sender, booster, spherical elbow, unloader, piping system, etc. The compressed air is passed into the sender tank with materials, so that the materials are mixed with compressed air and fluidized, and the materials are sent to each unloading point through the conveying pipe under the impetus of compressed air.
Pneumatic conveying device according to the production capacity can be divided into 5t/h, 10t/h, according to the customer's actual production demand for adaptation.