Ukubonisa umlingani
The crushing and regeneration machine is the old sand regeneration equipment for resin sand developed on the basis of absorbing the advanced technology of foreign countries in the nineties and summarizing the many years of experience in manufacturing resin sand equipment in our factory, which integrates sand crushing, screening and primary regeneration as a whole, and it occupies an area of less than one million square meters, has a simple structure, is easy to operate, has fewer wearing parts, and has a convenient technological arrangement with a lifting effect on the sand.
The machine adopts vibration motor as vibration source, the sand block after falling sand enters into the screen frame directly from the feeding port, the vibration motor installed at a certain angle is tilted, the excitation force makes the sand block and the screen frame wall, the sand block and the sand block to produce a strong collision between the block and the sand block and rubbing to make the sand block crushing, the crushed sand particles are transported up to the screen mesh, and the sand block and other wastes that can not be crushed again in the process of transporting and vibrating are separated, and are discharged from the waste port, and the qualified sand particles are sent to the discharge port. Sand is sent to the discharge port, in the process of crushing, conveying and screening, part of the resin film on the surface of the sand particles fall off, thus completing the crushing of sand and primary regeneration process, there is also a waste door at the back of the equipment to remove iron beans and other wastes, and the observation door can be observed in the sand conveyor and the bottom of the wear and tear of the plate.
The crushing and regeneration machine has various forms such as S564I, S568I and S5616I, which can be selected according to the customer's demand and site conditions.
The machine adopts vibration motor as vibration source, the sand block after falling sand enters into the screen frame directly from the feeding port, the vibration motor installed at a certain angle is tilted, the excitation force makes the sand block and the screen frame wall, the sand block and the sand block to produce a strong collision between the block and the sand block and rubbing to make the sand block crushing, the crushed sand particles are transported up to the screen mesh, and the sand block and other wastes that can not be crushed again in the process of transporting and vibrating are separated, and are discharged from the waste port, and the qualified sand particles are sent to the discharge port. Sand is sent to the discharge port, in the process of crushing, conveying and screening, part of the resin film on the surface of the sand particles fall off, thus completing the crushing of sand and primary regeneration process, there is also a waste door at the back of the equipment to remove iron beans and other wastes, and the observation door can be observed in the sand conveyor and the bottom of the wear and tear of the plate.
The crushing and regeneration machine has various forms such as S564I, S568I and S5616I, which can be selected according to the customer's demand and site conditions.