Dust removal equipment is an indispensable environmental protection equipment in the casting sand treatment process, which can be divided into dust collectors and dust covers. The lifting dust collector is divided into bag dust collector and filter cartridge dust collector, and the dust cover is customized according to the equipment.

Bag dust collector:

LMFPulse bagDust collector is suitable for purification of various non-corrosive dry gases not exceeding100℃. It can be used for dust removal in foundry workshops, coal powder and clay, and dust removal in all pneumatic conveying equipment. It can be used in combination or separately.

Structural features:

LMF dust collector adopts bag filter, pulse backflushing, and positive pressure external filtration structure. It mainly consists of the followingpartsComposition:

    1. Upper part: upper dust removal chamber, top cover.

    2. Middle part: lower dust removal chamber.

    3. Base: air inlet, ash bin, ash discharge device.

    4. Backflush and filtration system: The backflush system includes: pulse valve, blowing pipe, air bag, pipeline, pulse controller, differential pressure transmitter, etc.

5. The filtration system includes: filter bag and skeleton..

Technical parameters:

1. Dust collector filtration form: external filtration.                     

2,The dust removal efficiency is determined by the filter bag material. If there is no requirement, polyester needle punched filter felt is used. The emission concentration is less than30mg/m³。

3, pressure loss: less than100mm water column.

4,Filter bag material :500g polyester needle punched filter felt (users can choose their own).

Includes goods:

LMF series dust collector includes various specifications, which can be divided into LMF30, LMF50, LMF120, LMF300, LMF400, LMF1000, etc. according to the dust removal area. It can be reasonably configured according to the site conditions and customer requirements.

Filter cartridge dust collector:

The structure of the filter cartridge dust collector is similar to that of the bag dust collector, except that the filter cloth bag is in the form of a filter cartridge, which can be configured according to the required filtering area.

Dust cover:

The dust cover is a non-standard equipment, and its style and size are made according to the corresponding equipment.