Wprowadzenie produktu
Elevator is an important equipment for sand transfer in casting sand treatment production line, commonly used ring chain elevator, bucket elevator.
Ring chain elevator:
This machine is a kind of ring chain centrifugal bucket elevator, elevator system consists of moving part (chain and hopper) with transmission sprocket upper section, lower section with tensioning sprocket, intermediate casing, driving device, backstop braking device and other components.
The hopper of this hoist is arranged intermittently, and the hopper is unloaded by the “centrifugal feeding method”.
The traction mechanism of this elevator is two kinds of forged ring chain, which uses friction to drive with the upper and lower sprockets, so it operates smoothly and quietly, and is a kind of lighter fast elevator.
This elevator is suitable for conveying powdery, granular and small non-abrasive materials. Such as coal, cement, stone, sand, clay, ore, etc. As the traction mechanism of the elevator is ring chain, it is allowed to convey materials with higher temperature.
In order to adapt to the different pulling out and throwing out characteristics of the materials to be conveyed, this machine is equipped with two kinds of hoppers - deep round bottom type hopper and shallow type hopper.
Deep round bottom type hopper is suitable for conveying dry, loose and easy to throw out materials, such as cement, coal, dry sand, gravel and so on.
Shallow round bottom type hopper is suitable for conveying warm, easy to lump, difficult to throw out the material, such as warm sand, sand and so on.
HL bucket elevator has two types of its specification model: HL300 and HL400, the conveying capacity range is between 16-47.2m³/h, and the height of elevator is about 4.5-30m.
Bucket elevator:
The machine is installed on the transport tape many hanging buckets for vertical movement of a continuous transportation equipment, in the foundry workshop is mostly used for new sand, old sand lifting, filling the hopper in the belt driven to the top of the material, by the belt in the turn produced by the centrifugal force of the material unloading to the next process.
Bucket elevator has the advantages of small footprint, simple structure, easy maintenance, etc. It is the ideal equipment for conveying dry sand.
The machine consists of four parts: bottom section of bucket elevator, middle shell, top section of bucket elevator and transmission part.
Bottom section of bucket elevator: welded by steel plate into a box structure, with access door, bottom wheel and bottom shaft and adjustment mechanism, used to adjust the belt tension.
Intermediate shell: welded from steel plate into a box structure.
Bucket elevator top section: welded from steel plate into a box structure, with a discharge port, discharge port on the observation door, the transmission mechanism of the pendulum pinwheel speed reducer, sprocket chain and anti-backup device are installed in the top section, and there is a belt tensioning mechanism.
Transmission part: the top section pulley is driven to rotate by the motor through the cycloid pin reducer, the belt is installed between the upper and lower pulleys, and the hopper is installed on the belt.
Bucket elevator model is divided into two kinds: S524VII, S528IX, D350, D450, etc.
Ring chain elevator:
This machine is a kind of ring chain centrifugal bucket elevator, elevator system consists of moving part (chain and hopper) with transmission sprocket upper section, lower section with tensioning sprocket, intermediate casing, driving device, backstop braking device and other components.
The hopper of this hoist is arranged intermittently, and the hopper is unloaded by the “centrifugal feeding method”.
The traction mechanism of this elevator is two kinds of forged ring chain, which uses friction to drive with the upper and lower sprockets, so it operates smoothly and quietly, and is a kind of lighter fast elevator.
This elevator is suitable for conveying powdery, granular and small non-abrasive materials. Such as coal, cement, stone, sand, clay, ore, etc. As the traction mechanism of the elevator is ring chain, it is allowed to convey materials with higher temperature.
In order to adapt to the different pulling out and throwing out characteristics of the materials to be conveyed, this machine is equipped with two kinds of hoppers - deep round bottom type hopper and shallow type hopper.
Deep round bottom type hopper is suitable for conveying dry, loose and easy to throw out materials, such as cement, coal, dry sand, gravel and so on.
Shallow round bottom type hopper is suitable for conveying warm, easy to lump, difficult to throw out the material, such as warm sand, sand and so on.
HL bucket elevator has two types of its specification model: HL300 and HL400, the conveying capacity range is between 16-47.2m³/h, and the height of elevator is about 4.5-30m.
Bucket elevator:
The machine is installed on the transport tape many hanging buckets for vertical movement of a continuous transportation equipment, in the foundry workshop is mostly used for new sand, old sand lifting, filling the hopper in the belt driven to the top of the material, by the belt in the turn produced by the centrifugal force of the material unloading to the next process.
Bucket elevator has the advantages of small footprint, simple structure, easy maintenance, etc. It is the ideal equipment for conveying dry sand.
The machine consists of four parts: bottom section of bucket elevator, middle shell, top section of bucket elevator and transmission part.
Bottom section of bucket elevator: welded by steel plate into a box structure, with access door, bottom wheel and bottom shaft and adjustment mechanism, used to adjust the belt tension.
Intermediate shell: welded from steel plate into a box structure.
Bucket elevator top section: welded from steel plate into a box structure, with a discharge port, discharge port on the observation door, the transmission mechanism of the pendulum pinwheel speed reducer, sprocket chain and anti-backup device are installed in the top section, and there is a belt tensioning mechanism.
Transmission part: the top section pulley is driven to rotate by the motor through the cycloid pin reducer, the belt is installed between the upper and lower pulleys, and the hopper is installed on the belt.
Bucket elevator model is divided into two kinds: S524VII, S528IX, D350, D450, etc.